BOD INCUBATOR
(Bio Chemical Oxygen Demand Incubator)

TI - 36 BOD INCUBATOR (Low Temperature Incubator)

Application : Specially designed to meet the requirements for incubation of bacteria to decompose organic matter in waste water. It is used in Biology, Botany Virology, and Oceanography. Water pollution, sewage, agriculture, food and research departments also use it. In addition to this, it helps in preservation of vaccines. It provides a wide range of conditions for the study of synthesizing organisms. Temperature range, 5^o C to 50^o C, is attainable within the cabinet to he study the growth of organisms under tropical or temperate and summer or winter conditions. Temperature is controlled with an Electronic Digital Temperature Controller cum Indicator with an accuracy of + 0.5^o C or better.

Construction : BOD incubator is double walled cabinet with inner chamber anodized aluminium sheet or stainless steel 304 grade. Sealed heating element is provided with the chamber, which is fabricated, with various ribs to adjust removable shelves, specially designed, to any convenient height. Outer body is made if mild steel sheet with attractive stove enamel paint. The gap between the two walls is filled with puff insulation for achieving better temperature in minimum possible time. Two air circulating fans are provided for uniformity of temperature. It is specially designed with tough, calm and cool sealed compressor that is placed below the chamber along with evaporator coil and fan cooled condenser. Acrylic sheet provides full view of the inner working space-allowing inspection of samples without disturbing the operation. Outer metal door is provided with magnetic gasket illumination lamp switch, lock and key. The body is mounted on special sturdy double castors.

Control Panel : Control Panel is provided at the top of cabinet with Electronic Digital Controller Cum Indicator with a controlling accuracy +0.5^o C or better (with dual temperature display). Voltage Stabilizer is also built-in and voltmeter is provided near the controller.

Power Supply : To be connected with a socket of 230 volts + 10%, 50Hz, single phase.

Operation : Switch on and set the desired temperature (between 5^o C to 50^o C) with the help of Digital Temperature Controller Cum Indicator. This controller has a dual display i.e. both the set temperature and the inside temperature is displayed at the same time. The indicator has a controlling accuracy of + 0.5^o C or better.

 

S.NO.	CAPACITY (In cubic feet)	APP. INNER CHAMBER SIZE (W x H x D)
A B C D E	4 6 10 12 15	In mm 455 x 610 x 140 510 x 830 x 410 570 x 870 x 570 650 x 900 x 585 710 x 900 x 660	In Inches 18 x 24 x 16 20 x 32.5 x 16 22.5 x 34.25 x 22.5 25.5 x 35.5 x 23 28 x 35.5 x 26

Optional Accessories:
1) 3 Fluorescent tubes of 60cm Length are provided for interior illumination, placed vertically along the back wall with three separate on-off switches
Note : With Fluorescent tube we can maintain 5^o C temperature also.
2) Automatic cycle timer 0 to 24 hours for regulating illumination cycles